Silicone passive sampling used to identify novel dermal chemical exposures of firefighters and assess PPE innovations.

A plethora of chemicals are released into the air during combustion events, including a class of compounds called polycyclic aromatic hydrocarbons (PAHs). PAHs have been implicated in increased risk of cancer and cardiovascular disease, both of which are disease endpoints of concern in structural firefighters. Current commercially available personal protective equipment (PPE) typically worn by structural firefighters during fire responses have gaps in interfaces between the ensemble elements (e.g., hood and jacket) that allow for ingress of contaminants and dermal exposure. This pilot study aims to use silicone passive sampling to assess improvements in dermal protection afforded by a novel configuration of PPE, which incorporates a one-piece liner to eliminate gaps in two critical interfaces between pieces of gear. The study compared protection against parent and alkylated PAHs between the one-piece liner PPE and the standard configuration of PPE with traditional firefighting jacket and pants. Mannequins (n = 16) dressed in the PPE ensembles were placed in a Fireground Exposure Simulator for 10 min, and exposed to smoke from a combusting couch. Silicone passive samplers were placed underneath PPE at vulnerable locations near interfaces in standard PPE, and in the chamber air, to measure PAHs and calculate the dermal protection provided by both types of PPE. Silicone passive sampling methodology and analyses using gas chromatography with mass-spectrometry proved to be well-suited for this intervention study, allowing for the calculation and comparison of worker protection factors for 51 detected PAHs. Paired comparisons of the two PPE configurations found greater sum 2-3 ring PAH exposure underneath the standard PPE than the intervention PPE at the neck and chest, and at the chest for 4-7 ring PAHs (respective p-values: 0.00113, 0.0145, and 0.0196). Mean worker protection factors of the intervention PPE were also greater than the standard PPE for 98% of PAHs at the neck and chest. Notably, the intervention PPE showed more than 30 times the protection compared to the standard PPE against two highly carcinogenic PAHs, dibenzo[a,l]pyrene and benzo[c]fluorene. Nine of the detected PAHs in this study have not been previously reported in fireground exposure studies, and 26 other chemicals (not PAHs) were detected using a large chemical screening method on a subset of the silicone samplers. Silicone passive sampling appears to be an effective means for measuring dermal exposure reduction to fireground smoke, providing evidence in this study that reducing gaps in PPE interfaces could be further pursued as an intervention to reduce dermal exposure to PAHs, among other chemicals.

Associating Increased Chemical Exposure to Hurricane Harvey in a Longitudinal Panel Using Silicone Wristbands.

Hurricane Harvey was associated with flood-related damage to chemical plants and oil refineries, and the flooding of hazardous waste sites, including 13 Superfund sites. As clean-up efforts began, concerns were raised regarding the human health impact of possible increased chemical exposure resulting from the hurricane and subsequent flooding. Personal sampling devices in the form of silicone wristbands were deployed to a longitudinal panel of individuals (n = 99) within 45 days of the hurricane and again one year later in the Houston metropolitan area. Using gas chromatography−mass spectroscopy, each wristband was screened for 1500 chemicals and analyzed for 63 polycyclic aromatic hydrocarbons (PAHs). Chemical exposure levels found on the wristbands were generally higher post-Hurricane Harvey. In the 1500 screen, 188 chemicals were detected, 29 were detected in at least 30% of the study population, and of those, 79% (n = 23) were found in significantly higher concentrations (p < 0.05) post-Hurricane Harvey. Similarly, in PAH analysis, 51 chemicals were detected, 31 were detected in at least 30% of the study population, and 39% (n = 12) were found at statistically higher concentrations (p < 0.05) post-Hurricane Harvey. This study indicates that there were increased levels of chemical exposure after Hurricane Harvey in the Houston metropolitan area.

Photocatalytic activity, water absorption capacity, and thermal stability of white cement-based mortars with polysiloxane silicone and different doses of titanium dioxide nanoparticles / Actividad fotocatalítica, absorción de agua y estabilidad térmica de morteros a base de cemento blanco con silicona de polisiloxano y diferentes dosis de nanopartículas de dióxido de titanio

White cement-based mortars in urban areas are usually discolored and altered their esthetic properties due to air pollutants. The addition of nanoparticles in these mortars can provide photocatalytic properties that can decompose pollution agents. Likewise, other hydrophobic agents have been individually studied to improve outdoor building constructions. Therefore, this study presented the photocatalytic and hydrophobic effect of adding nano-TiO2and silicone hydrophobic powder (DOWSILTM) in a white cement matrix. The nano-TiO2 were characterized by X-Ray Diffraction (XRD); afterwards, the mortar was mixed with additions of nano-TiO2 (0.0, 0.5, 1.0, 3.0%) and DOWSILTM (0.0, 0.5%). The mortar's photocatalytic performance was evaluated using a modification of the standard Italian test Ente Nazionale Italiano di Unificazione 11259:2016 based on Rhodamine B (RhB) degradation on the sample exposed to UV irradiation. Therefore, mortar samples were subjected to UV irradiation to degrade the organic dye rhodamine B, monitoring their color variation using a C I E L* a* b* spectrophotometer. Moreover, the water permeability and the contact angle were evaluated. This research demonstrates that the white cement-based mortar samples added with nano-TiO2/DOWSILTM possess photocatalytic activity. The samples with the addition of 1.0%/0.5% and 3.0%/0.5% nano-TiO2/DOWSILTM showed a higher RhB degradation for R4 and R26. Therefore, these two materials can be employed in these proportions to improve the quality of the white cement-based mortars in urban constructions.

Los morteros a base de cemento blanco generalmente se decoloran y alteran sus propiedades estéticas debido a los contaminantes del aire en las áreas urbanas. Nanopartículas añadidas a estos morteros pueden proporcionar propiedades fotocatalíticas que descomponen estos contaminantes. Asimismo, otros agentes hidrofóbicos se han estu-diado individualmente para mejorar las construcciones a la intemperie. Por lo tanto, se presenta el efecto fotocatalítico e hidrofóbico al incorporar nano-TiO2 y silicona hidrofóbica de polisiloxano (DOWSILTM) en una matriz de cemento blanco. El nano-TiO2 se caracterizó por medio de Difracción de Rayos X (DRX); luego, el mortero se mezcló con adiciones de nano-TiO2 (0.0, 0.5, 1.0, 3.0%) y DOWSILTM (0.0, 0.5%). Los morteros se sometieron a irradiación UV, para degradar el colorante orgánico rodamina B, monitoreando su variación de color usando un espectrofotómetro C I E L* a* b*. La eficiencia fotocatalítica del mortero se evaluó utilizando una modificación de la norma italiana Ente Nazionale Italiano di Unificazione 11259:2016 basada en la degradación de la rodamina B (RhB) en el mortero expuesto a la radiación UV. Además, se evaluó la permeabilidad al agua y el ángulo de contacto. Esta investigación demostró que el mortero de cemento con nano-TiO2/ DOWSILTM posee actividad fotocatalítica. Las muestras con 1.0%/0.5% y 3.0%/0.5% nano-TiO2/DOWSILTM mostraron una mayor eficiencia de degradación de RhB para R4 y R26. Por lo tanto, estos materiales tienen potencial para mejorar la calidad de los morteros en construcciones urbanas.

Nicotine, Cotinine, and Tobacco-Specific Nitrosamines Measured in Children's Silicone Wristbands in Relation to Secondhand Smoke and E-cigarette Vapor Exposure.

INTRODUCTION: Simple silicone wristbands (WB) hold promise for exposure assessment in children. We previously reported strong correlations between nicotine in WB worn by children and urinary cotinine (UC). Here, we investigated differences in WB chemical concentrations among children exposed to secondhand smoke from conventional cigarettes (CC) or secondhand vapor from electronic cigarettes (EC), and children living with nonusers of either product (NS). METHODS: Children (n = 53) wore three WB and a passive nicotine air sampler for 7 days and one WB for 2 days, and gave a urine sample on day 7. Caregivers reported daily exposures during the 7-day period. We determined nicotine, cotinine, and tobacco-specific nitrosamines (TSNAs) concentrations in WB, nicotine in air samplers, and UC through isotope-dilution liquid chromatography with triple-quadrupole mass spectrometry. RESULTS: Nicotine and cotinine levels in WB in children differentiated between groups of children recruited into NS, EC exposed, and CC exposed groups in a similar manner to UC. WB levels were significantly higher in the CC group (WB nicotine median 233.8 ng/g silicone, UC median 3.6 ng/mL, n = 15) than the EC group (WB nicotine median: 28.9 ng/g, UC 0.5 ng/mL, n = 19), and both CC and EC group levels were higher than the NS group (WB nicotine median: 3.7 ng/g, UC 0.1 ng/mL, n = 19). TSNAs, including the known carcinogen NNK, were detected in 39% of WB. CONCLUSIONS: Silicone WB show promise for sensitive detection of exposure to tobacco-related contaminants from traditional and electronic cigarettes and have potential for tobacco control efforts. IMPLICATIONS: Silicone WB worn by children can absorb nicotine, cotinine, and tobacco-specific nitrosamines, and amounts of these compounds are closely related to the child's urinary cotinine. Levels of tobacco-specific compounds in the silicone WB can distinguish patterns of children's exposure to secondhand smoke and e-cigarette vapor. Silicone WB are simple to use and acceptable to children and, therefore, may be useful for tobacco control activities such as parental awareness and behavior change, and effects of smoke-free policy implementation.

Mathematical modeling and computer simulation of needle insertion into soft tissue.

In this study we present a kinematic approach for modeling needle insertion into soft tissues. The kinematic approach allows the presentation of the problem as Dirichlet-type (i.e. driven by enforced motion of boundaries) and therefore weakly sensitive to unknown properties of the tissues and needle-tissue interaction. The parameters used in the kinematic approach are straightforward to determine from images. Our method uses Meshless Total Lagrangian Explicit Dynamics (MTLED) method to compute soft tissue deformations. The proposed scheme was validated against experiments of needle insertion into silicone gel samples. We also present a simulation of needle insertion into the brain demonstrating the method's insensitivity to assumed mechanical properties of tissue.

Characterization and classification of water-based compounds in condoms and personal hygiene products using GC-MS.

Analysis of condom evidence commonly focusses on the detection of silicone-based lubricants, such as polydimethylsiloxane. However, water-based compounds such as propylene glycol or glycerin can also be used as condom lubricants and may, therefore, be detected as transferred traces. Evaluation of the variability amongst a large sample set from an international market is needed to determine what are the most likely compounds that may be detected in casework. In this study, 165 condoms, personal hygiene products, lubricants, creams and oils were analysed using gas-chromatography coupled to a mass spectrometer detector (GCMS). The resulting compounds were identified using mass spectral databases, then the data were extracted and evaluated using established multivariate statistical techniques, such as principal component analysis and discriminant analysis. Qualitative visual inspection, as well as statistical analysis, revealed at least twelve different groupings within the dataset. Discrimination was based on variations in the concentration of major compounds, as well as the presence or absence of minor compounds, such as anaesthetics. For the 127 condoms examined, 2 were exclusively water-based lubricated (1.5 %) and 6 contained silicone and water-based components (4.7 %). All the others were only silicone-based (119 condoms, 93.7 %). Strong variation was observed between the different sources of products. Personal hygiene products (PHP), creams, lubricating oils, personal lubricants, and condoms were found to have different chemical compositions. Hence GCMS can be used to assist in the differentiation of water-based residues for investigative purposes.

Evaluation of silicone-based wristbands as passive sampling systems using PAHs as an exposure proxy for carcinogen monitoring in firefighters: Evidence from the firefighter cancer initiative.

Compared to the general population, firefighters are known to sustain greater levels of exposure to hazardous compounds, despite their personal protective equipment, also known as turnout gear. Among the most significant toxins that firefighters are chronically exposed to are polycyclic aromatic hydrocarbons (PAHs). Additionally, firefighters have also been noted to exhibit an increased incidence of certain types of cancer. Considering a probable link between exposure to PAHs and increased rates of cancer in the fire service, we aim to document ambient chemical concentrations in the firefighter work environment. Our strategy involves the use of silicone-based wristbands that have the capacity to passively sorb PAHs. To determine if wristbands can serve as an effective chemical monitoring device for the fire service, silicone wristbands were pilot-tested as personal sampling devices for work environment risk monitoring in active-duty firefighters. Recovered wristbands underwent multiple extraction steps, followed by GC-MS analysis to demonstrate their efficacy in monitoring PAHs in the firefighter environment. Initial findings from all wristband samples taken from firefighters showed multiple exposures to various PAHs of concern for the health of the firefighters when in a fire environment. In addition to PAH monitoring, we examined known and potential sources of PAH contamination in their work environment. To that end, profiles of elevated PAH concentrations were documented at various fire stations throughout South Florida, for individual firefighters both during station duties and active fire response.

Synergistic mode of action of catechin, vanillic and protocatechuic acids to inhibit the adhesion of uropathogenic Escherichia coli on silicone surfaces.

AIMS: To study the individual and combined contribution of catechin, protocatechuic and vanillic acids to inhibit the adhesion of uropathogenic Escherichia coli (UPEC) on the surface of silicone catheters. METHODS AND RESULTS: The adhesion of UPEC to silicone catheters during the exposure to nonlethal concentrations of phenolic compounds was measured, as well as changes in motility, presence of fimbriae, extra-cellular polymeric substances, surface charge, hydrophobicity and membrane fluidity. The phenolic combination reduced 26-51% of motility, 1 log CFU per cm2 of adhered bacteria and 20-40% the carbohydrate and protein content in the biofilm matrix. Curli fimbriae, surface charge and cell hydrophobicity were affected to a greater extent by the phenolic combination. In the mixture, vanillic acid was the most effective for reducing bacterial adhesion, extra-polymeric substance production, motility, curli fimbriae and biofilm structure. Notwithstanding, protocatechuic acid caused major changes in the bacterial cell surface properties, whereas catechin affected the cell membrane functionality. CONCLUSION: Catechin, protocatechuic and vanillic acids have different bacterial cell targets, explaining the synergistic effect of their combination against uropathogenic E. coli. SIGNIFICANCE AND IMPACT OF STUDY: This study shows the contribution of catechin, protocatechuic and vanillic acids in producing a synergistic mixture against the adhesion of uropathogenic E. coli on silicone catheters. The action of catechin, vanillic and protocatechuic acids included specific contributions of each compound against the E. coli membrane's integrity, motility, surface properties and production of extracellular polymeric substances. Therefore, the studied mixture of phenolic compounds could be used as an antibiotic alternative to reduce urinary tract infections associated with silicone catheters.

Characterization and quantitation of PVP content in a silicone hydrogel contact lens produced by dual-phase polymerization processing.

Polyvinylpyrrolidone (PVP) has been incorporated over the years into numerous hydrogel contact lenses as both a primary matrix component and an internal wetting agent to increase lens wettability. In this study, complementary analytical techniques were used to characterize the PVP wetting agent component of senofilcon A and samfilcon A contact lenses, both in terms of chemical composition and amount present. Photo-differential scanning calorimetry (photo-DSC), gas chromatography with a flame ionization detector (GC-FID), and high-resolution/accurate mass (HR/AM) liquid chromatography-mass spectrometry (LC-MS) techniques confirmed dual phase reaction and curing of the samfilcon A silicone hydrogel material. Gel permeation chromatography (GPC) demonstrated that high molecular weight (HMW) polymer was present in isopropanol (IPA) extracts of both lenses. High-performance liquid chromatography (HPLC) effectively separated hydrophilic PVP from the hydrophobic silicone polymers present in the extracts. Collectively, atmospheric solids analysis probe mass spectrometry (ASAP MS), Fourier transform infrared (FTIR) spectroscopy, 1 H nuclear magnetic resonance (NMR) spectroscopy, GC-FID, and LC-MS analyses of the lens extracts indicated that the majority of NVP is consumed during the second reaction phase of samfilcon A lens polymerization and exists as HMW PVP, similar to the PVP present in senofilcon A. GC-FID analysis of pyrolyzed samfilcon A and senofilcon A indicates fourfold greater PVP in samfilcon A compared with senofilcon A. © 2017 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 1064-1072, 2018.

Functional biocompatibility testing of silicone breast implants and a novel classification system based on surface roughness.

PURPOSE: Increasing numbers of women undergo breast implantation for cosmetic and reconstructive purposes. Contracture of the fibrous capsule, which encases the implant leads to significant pain and reoperation. Texture, wettability and the cellular reaction to implant surfaces are poorly understood determinants of implant biocompatibility. The aim of this study was to evaluate the in-vitro characteristics of a range of commercial available implants using a macrophage based assay of implant biocompatibility and a quantitative assessment of wettability and texture. METHODS: Thirteen commercially available surfaces were subjected to wettability and texture characterisation using scanning and laser confocal microscopy. THP-1 macrophages were cultured on their surfaces and assessed using Integrin αV immunocytochemistry, SEM and RT-PCR for the expression of TNF-Alpha, IL-6, IL-10 and a cytokine array for the production of TNF-alpha, IL-10, IL-1RA and IL1ß; important indicators of inflammation and macrophage polarization. RESULTS: Textured surfaces can be accurately sub-categorized dependent upon roughness and re-entrant features into four main types (macro, micro, meso and nano-textured surfaces). Significant (P < 0.0001) differences in implant hydrophobicity and texture exist. Certain surfaces promoted poor macrophage polarization and an innate potential to foster a proinflammatory response. A subgroup analysis showed that texture had a variable effect on markers of inflammation in these surfaces. CONCLUSIONS: We propose a classification of implant surfaces based on roughness and present a macrophage based assay of breast implant biocompatibility with a quantitative assessment of implant wettability and texture. The breast implant surface-cell interaction is variable and sufficient to alter healing response and capsular contracture fate in-vivo.

Reabsorção óssea associada ao implante de silicone em mentoplastia: relato de caso clínico / Bone reabsorption associated with silicone implants in mentoplasty: a clinical case report

Durante muitos anos, os implantes de silicone foram utilizados em cirurgias reconstrutivas e estéticas, principalmente em casos em que o perfil facial do paciente apresenta deficiência no terço inferior da face. Este material tem provado ser bem sucedido na maioria dos aspectos, contudo, algumas complicações já foram bem relatadas na literatura, como é o caso das reabsorções ósseas na região de mento mandibular. No presente artigo os autores apresentam dois casos clínicos de reabsorção óssea da cortical anterior do mento, associada ao implante de silicone e discutem a etiologia, as complicações e o plano de tratamento.

For many years, silicone implants were used in reconstructive and esthetic surgeries, especially in cases in which the facial profile of patients presented deficiencies in the inferior third of the face. This material proved to be successful in most aspects. However, several complications were well reported in the literature, as the case of bone reabsorption in the region of the mandibular chin. In this article, the authors present two clinical cases of bone reabsorption from the anterior cortex of the chin associated with silicone implants and discuss the etiology, complications, and treatment plan.

Silicone Migration From Baked-on Silicone Layers. Particle Characterization in Placebo and Protein Solutions.

A significant number of therapeutic proteins are marketed as pre-filled syringes or other drug/device combination products and have been safely used in these formats for years. Silicone oil, which is used as lubricant, can migrate into the drug product and may interact with therapeutic proteins. In this study, particles in the size range of 0.2-5 µm and ≥1 µm as determined by resonant mass measurement and micro-flow imaging/light obscuration, respectively, resulted from silicone sloughing off the container barrel after agitation. The degree of droplet formation correlated well with the applied baked-on silicone levels of 13 µg and 94 µg per cartridge. Silicone migration was comparable in placebo, 2 mg/mL and 33 mg/mL IgG1 formulations containing 0.04% (w/v) polysorbate 20. Headspace substantially increased the formation of silicone droplets during agitation. The highest particle concentrations reached, however, were still very low compared to numbers described for spray-on siliconized containers. When applying adequate baked-on silicone levels below 100 µg, bake-on siliconization efficiently limits silicone migration into the drug product without compromising device functionality.

Quantification of biofilm formation on silicone intranasal splints: An in vitro study.

OBJECTIVES: Biofilms are associated with persistent infections and resistant to conventional therapeutic strategies. The aim of this study was to investigate the quantity of biofilm produced on silicone intranasal splints. METHODS: Quantity of biofilm formation on silicone splints (SS) was tested on 15 strains of Staphylococcus aureus and Moraxella catarrhalis, respectively. Antimicrobial susceptibility testing was performed in accordance with European Committee on Antimicrobial Susceptibility Testing recommendations. RESULTS: All tested strains formed different amounts of biofilm on SS: 66.7% S. aureus and 93.3% M. catarrhalis were weak biofilm producers and 33.3% S. aureus and 6.7% M. catarrhalis were moderate biofilm producers. S. aureus formed significantly higher quantity of biofilm compared with M. catarrhalis (p < 0.05). Multidrug resistant S. aureus produced significantly higher amount of biofilm compared with non-multidrug resistant strains (p < 0.05). CONCLUSION: Quantity of biofilm on SS is highly dependent on bacterial species and their resistance patterns. Future studies are needed to ascertain another therapeutic option for prophylaxis prior to SS placement.

Creep analysis of silicone for podiatry applications.

PURPOSE: This work shows an effective methodology to characterize the creep-recovery behavior of silicones before their application in podiatry. The aim is to characterize, model and compare the creep-recovery properties of different types of silicone used in podiatry orthotics. METHODS: Creep-recovery phenomena of silicones used in podiatry orthotics is characterized by dynamic mechanical analysis (DMA). Silicones provided by Herbitas are compared by observing their viscoelastic properties by Functional Data Analysis (FDA) and nonlinear regression. The relationship between strain and time is modeled by fixed and mixed effects nonlinear regression to compare easily and intuitively podiatry silicones. RESULTS: Functional ANOVA and Kohlrausch-Willians-Watts (KWW) model with fixed and mixed effects allows us to compare different silicones observing the values of fitting parameters and their physical meaning. The differences between silicones are related to the variations of breadth of creep-recovery time distribution and instantaneous deformation-permanent strain. Nevertheless, the mean creep-relaxation time is the same for all the studied silicones. Silicones used in palliative orthoses have higher instantaneous deformation-permanent strain and narrower creep-recovery distribution. CONCLUSIONS: The proposed methodology based on DMA, FDA and nonlinear regression is an useful tool to characterize and choose the proper silicone for each podiatry application according to their viscoelastic properties.

Siliconomas axilares en pacientes con melanoma / Axillary Silicone Granulomas in Patients With Melanoma

Durante el seguimiento de pacientes con melanoma podemos detectar lesiones subcutáneas cuyo principal diagnóstico diferencial son las metástasis en tránsito o las adenopatías metastásicas. Se describen 2 mujeres con melanoma portadoras de prótesis mamarias que presentaron durante su seguimiento lesiones subcutáneas palpables en la región axilar. El estudio ecográfico puso de manifiesto en ambos casos la existencia de imágenes hiperecogénicas difusas en «tormenta de nieve» localizadas en el tejido subcutáneo. En estos casos la ecografía se posiciona como herramienta diagnóstica fundamental para el despistaje de procesos relacionados con el melanoma, como las metástasis en tránsito o las adenopatías metastásicas

Subcutaneous lesions may be detected during follow-up of patients with melanoma. The main entities that should be contemplated in the differential diagnosis in such cases are in-transit and regional lymph node metastases. We describe 2 cases of women with breast implants who developed palpable subcutaneous lesions in the axillary region during follow-up of melanoma. In both cases, the ultrasound study showed diffuse hyperechoic signals forming the characteristic snowstorm sign in the subcutaneous tissue. Ultrasound proved to be a key diagnostic tool for ruling out melanoma-related disease, such as in-transit metastases and regional lymph node metastases

Outdoor ultrafine particle concentrations in front of fast food restaurants.

Ultrafine particles (UFPs) have been associated with negative effects on human health. Emissions from motor vehicles are the principal source of UFPs in urban air. A study in Vancouver suggested that UFP concentrations were related to density of fast food restaurants near the monitoring sites. A previous monitoring campaign could not separate the contribution of restaurants from road traffic. The main goal of this study has been the quantification of fast food restaurants' contribution to outdoor UFP concentrations. A portable particle number counter (DiscMini) has been used to carry out mobile monitoring in a largely pedestrianized area in the city center of Utrecht. A fixed route passing 17 fast food restaurants was followed on 8 days. UFP concentrations in front of the restaurants were 1.61 times higher than in a nearby square without any local sources used as control area and 1.22 times higher compared with all measurements conducted in between the restaurants. Adjustment for other sources such as passing mopeds, smokers or candles did not explain the increase. In conclusion, fast food restaurants result in significant increases in outdoor UFP concentrations in front of the restaurant.

Cost-efficient entrapment of ß-glucosidase in nanoscale latex and silicone polymeric thin films for use as stable biocatalysts.

ß-Glucosidase is an ubiquitous enzyme which has enormous biotechnological applications. Its deficiency in natural enzyme preparations is often overcome by exogenous supplementation, which further increases the enzyme utilization cost. Enzyme immobilization offers a potential solution through enzyme recycling and easy recovery. In the present work Aspergillus niger ß-glucosidase is immobilized within nanoscale polymeric materials (polyurethane, latex and silicone), through entrapment, and subsequently coated onto a fibrous support. Highest apparent activity (90 U g(-1) polymer) was observed with latex, while highest entrapment efficiency (93%) was observed for the silicone matrix. Immobilization resulted in the thermo-stabilization of the ß-glucosidase with an increase in optimum temperature and activation energy for cellobiose hydrolysis. Supplementation to cellulases also resulted in an increased cellulose hydrolysis, while retaining more than 70% functional stability. Hence, the current study describes novel preparations of immobilized ß-glucosidase as highly stable and active catalysts for industrial food- and bio-processing applications.

Personal exposure to ultrafine particles: Two-level statistical modeling of background exposure and time-activity patterns during three seasons.

Personal exposure to air pollution is associated with time- and location-specific factors including indoor and outdoor air pollution, meteorology and time activities. Our investigation aims at the description and identification of factors determining personal exposure to particle number concentration (PNC) in everyday situations. Ten volunteers recorded their personal exposure to PNC and kept an activity diary in three different seasons besides stationary measurements of ambient air pollution and meteorology. Background exposure to PNC was modelled using the most predictive variables. In a second step, the effects of the activities were calculated adjusted for the background exposure. The average personal PNC level was highest in winter and was three times higher than the mean stationary PNC level while staying indoors and two times higher while staying outdoors. Personal indoor PNC levels were significantly increased during the use of candles, cooking and the occurrence of smell of food. High stationary outdoor PNC levels and low dew point temperatures were associated with increased personal outdoor PNC levels. Times spent in public transport were associated with lower personal PNC levels than other times spent in transportation. Personal PNC levels in everyday situations exhibited a large variability because of seasonal, microenvironment-specific and activity-specific influences.

Avaliação da estabilidade dimensional de diferentes marcas de silicone por reação de condensação ­ estudo in vitro / Assessment of the dimensional stability of distinct condensation silicone trademarks ­ an in vitro study

Na prática odontológica, o vazamento de gesso nos moldes é muitas vezes tardio, e a maioria é enviada ao laboratório para verter o gesso em até 72 horas. Portanto, os profissionais devem ficar cientes do tempo de atraso tolerável para o qual o material de moldagem permanecerá dimensionalmente preciso. O objetivo deste estudo foi avaliar a alteração dimensional de quatro marcas comerciais de silicone por reação de condensação: Speedex (Vigodent)®, Coltex/Coltoflax (Vigodent)®, Clonage (Nova DFL)® e Zetaplus/Oranwash (Zhermack)®, em função de seis diferentes tempos de vazamento de gesso, e sugerir o tempo máximo de armazenagem dos moldes. Para isso, foi confeccionado um modelo mestre com três cilindros metálicos, fixados em região de rebordo alveolar de uma maxila em acrílico, e 12 moldeiras individuais. A técnica de moldagem utilizada foi a do material em consistência densa e fluida em dois estágios. foram obtidos 72 modelos em gesso GC fujirock® EP melhorado tipo IV, os quais foram mensurados com paquímetro digital Mytutoyo®. Os resultados foram comparados ao modelo controle e aplicados ao teste de hipóteses "t de student". Concluiu-se que as marcas comerciais de silicone por reação de condensação Zetaplus® e Clonage® apresentaram modelos experimentais que não diferiram estatisticamente do modelo mestre para todos os tempos estudados. Já as marcas comerciais Coltex Coltoflax® e Speedex® apresentaram-se estatisticamente diferentes ao modelo mestre nos maiores tempos de armazenamento.

In dental practice, plaster casting is often late, and most are sent to the laboratory to pour the plaster in up to 72 hours. Therefore professionals should be aware of the tolerable delay time for which the molding material will remain dimensionally accurate. The objective of this study was to evaluate the dimensional alteration of four commercial brands of silicone by condensation reaction, Speedex (Vigodent)®, Coltex / Coltoflax (Vigodent)®,Clonage (Nova DFL)®, Zetaplus / Oranwash (Zhermack)®, in function of six different casting times, and suggest the maximum storage time of the molds. Therefore, a master model with three metal cylinders was made, fixed in the alveolar ridge region of an acrylic jaw, and 12 individual trays. The technique of molding used was that of the material in dense consistency and fluid in two stages. A total of 72 GC fujirock® EP improved plaster models were obtained, which were measured using a Mytutoyo® digital caliper. The results were compared to the control model and the "t student" hypothesis test was applied. It was concluded that the trademarks of silicone by condensation reaction Zetaplus® and Clonage® presented experimental models that did not differ statistically from the master model for all the studied times. Coltex Coltoflax® and Speedex® trademarks were statistically different from the master model in the longest storage times.

Guides and protocols for a good practice. VI. Plastination

No disponible